手动end-2-end复盘测试(实操版)

妖狐艹你老母 2023-06-28 13:28 75阅读 0赞

> 环境：centos7.2 、Fabric1.4.4 、内存4G

#### 1、定义 who is who ####

准备文件：（直接从fabric-samples-release-1.4 的first-network cp了）

# cp -r base ../my-network/
    # cp crypto-config.yaml  ../my-network/
    # cp configtx.yaml  ../my-network/
    # cp docker-compose-cli.yaml  ../my-network/

#### 2、创建 crypto-config.yaml ####

直接使用first-network的，2个组织；每个组织2个节点，一个用户；一个orderer节点。

生成证书：

# export PATH=${PWD}/../bin:${PWD}:$PATH
    # cryptogen generate --config=./crypto-config.yaml

会自动生成 crypto-config 文件夹；目录结构如下所示：tree -L 5

> 注意：如果没有配置环境变量crytogen是无法找到，可以先执行\# export PATH= P W D / . . / b i n : \{PWD\}/../bin: PWD/../bin:\{PWD\}:$PATH我们事先已经在 usr/local/bin已经copy二进制文件，所以可以直接执行，没问题。

#### 3、创世区块的配置和生成|channel配置 ####

写入所有参与者的信息。 configtx.yaml:

# mkdir channel-artifacts

① 生成orderer节点的创世区块

#  configtxgen -profile TwoOrgsOrdererGenesis  -outputBlock ./channel-artifacts/genesis.block

② 生成channel 配置文件 -channelID $CHANNEL\_NAME 这里命名为 “mychannel”

#  configtxgen -profile TwoOrgsChannel -outputCreateChannelTx ./channel-artifacts/channel.tx -channelID mychannel

#### 4、生成（更新）锚节点配置 ####

org1锚节点生成配置：

#  configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate ./channel-artifacts/Org1MSPanchors.tx -channelID mychannel -asOrg Org1MSP

执行指令后会生成 Org1MSPanchors.tx

org2锚节点生成配置：

#  configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate ./channel-artifacts/Org2MSPanchors.tx -channelID mychannel -asOrg Org2MSP

执行指令后会生成 Org2MSPanchors.tx

#### 5、启动网络 ####

##### ①docker-compse启动容器（相当于6台服务器） #####

# export IMAGE_TAG=latest  && export COMPOSE_PROJECT_NAME=net && export SYS_CHANNEL=mychannel && CHANNEL_NAME=mychannel 
    
    建议启动前清理下：
    # cd ../first-network
    # ./byfn.sh -m down
    # docker-compose -f docker-compose-cli.yaml up -d

> 执行docker-compse前建议清理容器；一般不用使用docker rm ;kill命令。
> 
> 如果出现杀不掉的容器： docker ps -l 有留存的，则 docker rm $(docker ps -a -q)
> 
> 如果还杀不掉；采用后台杀进程后再执行 docker rm - f 命令。
> 
> grep docker /proc/\*/mountinfo | grep XXXXXXXXXX
> 
> kill -9 \[上步查询到进程号\]

##### ②创建channel #####

-------先进入cli客户端--------
    # docker exec -it cli bash

> 注意： cli客户端默认环境变量已经docker-compose-cli.yaml配置好了，默认是peer0.org1.example.com:7051 如下所示：

- FABRIC_LOGGING_SPEC=INFO
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp

创建通道：

peer channel create -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/channel.tx --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

##### ③加入通道 #####

peer0.org1加入通道

CORE_PEER_ADDRESS=peer0.org1.example.com:7051
    CORE_PEER_LOCALMSPID="Org1MSP"
    CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
    CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    peer channel join -b mychannel.block

peer1.org1加入

CORE_PEER_ADDRESS=peer1.org1.example.com:8051
    CORE_PEER_LOCALMSPID="Org1MSP"
    CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt
    CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    peer channel join -b mychannel.block

peer0.org2加入通道

peer1.org2 加入通道

CORE_PEER_ADDRESS=peer1.org2.example.com:10051
    CORE_PEER_LOCALMSPID="Org2MSP"
    CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
    CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    peer channel join -b mychannel.block

**④更新通道上锚节点信息**

Anchor peers updated for org ‘Org1MSP’ on channel ‘mychannel’

CORE_PEER_ADDRESS=peer0.org1.example.com:7051
    CORE_PEER_LOCALMSPID="Org1MSP"
    CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
    
    peer channel update -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/Org1MSPanchors.tx --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

Anchor peers updated for org ‘Org2MSP’ on channel ‘mychannel’

CORE_PEER_ADDRESS=peer0.org2.example.com:9051
    CORE_PEER_LOCALMSPID="Org2MSP"
    CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    
    peer channel update -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/Org2MSPanchors.tx --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem

##### **⑤安装链码** #####

在peer0.org1上安装链码

在peer1.org1上安装链码

在peer0.org2上安装链码

在peer1.org2上安装链码

##### ⑥实例化链码 #####

CORE_PEER_ADDRESS=peer0.org2.example.com:9051
    CORE_PEER_LOCALMSPID="Org2MSP"
    CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
    CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp
    
    peer chaincode instantiate -o orderer.example.com:7050 --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -n mycc -l node -v 1.0 -c '{"Args":["init","a","100","b","200"]}' -P 'AND ('\''Org1MSP.peer'\'','\''Org2MSP.peer'\'')'

> 查询实例化结果：peer chaincode list -C mychannel --instantiated

**⑦查询链码**

peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'

**⑧调用链码**

peer chaincode invoke -o orderer.example.com:7050 --tls true --cafile /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/ordererOrganizations/example.com/orderers/orderer.example.com/msp/tlscacerts/tlsca.example.com-cert.pem -C mychannel -n mycc --peerAddresses peer0.org1.example.com:7051 --tlsRootCertFiles /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt --peerAddresses peer0.org2.example.com:9051 --tlsRootCertFiles /opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt -c '{"Args":["invoke","a","b","10"]}'

(结束)