Nacos系列(2)-Nacos1.3.2服务端application.properties配置文件详解

「爱情、让人受尽委屈。」 2023-10-10 11:26 77阅读 0赞

### 当前版本1.3.2 ###

#
    # Copyright 1999-2018 Alibaba Group Holding Ltd.
    #
    # Licensed under the Apache License, Version 2.0 (the "License");
    # you may not use this file except in compliance with the License.
    # You may obtain a copy of the License at
    #
    #      http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing, software
    # distributed under the License is distributed on an "AS IS" BASIS,
    # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    # See the License for the specific language governing permissions and
    # limitations under the License.
    #
    
    #*************** Spring Boot Related Configurations ***************#
    ### Default web context path:
    # 访问路径
    server.servlet.contextPath=/nacos
    ### Default web server port:
    # 服务端口
    server.port=8848
    
    #*************** Network Related Configurations ***************#
    ### If prefer hostname over ip for Nacos server addresses in cluster.conf:
    # 从cluster.conf配置文件中获取IP（集群模式）
    # nacos.inetutils.prefer-hostname-over-ip=false
    
    ### Specify local server's IP:
    # 设置nacos的ip
    # nacos.inetutils.ip-address=
    
    
    #*************** Config Module Related Configurations ***************#
    ### If user MySQL as datasource:
    # 数据库类型
    # spring.datasource.platform=mysql
    ### Count of DB:
    # 数据库数量
    # db.num=1
    
    ### Connect URL of DB:
    # 数据库连接URL
    # db.url.0=jdbc:mysql://127.0.0.1:3306/nacos?characterEncoding=utf8&connectTimeout=1000&socketTimeout=3000&autoReconnect=true&useUnicode=true&useSSL=false&serverTimezone=UTC
    # 数据库用户
    # db.user=nacos
    # 数据库密码
    # db.password=nacos
    
    
    #*************** Naming Module Related Configurations ***************#
    ### Data dispatch task execution period in milliseconds:
    # 同步任务生成的周期，单位为毫秒	
    # nacos.naming.distro.taskDispatchPeriod=200
    
    ### Data count of batch sync task:
    # 同步任务每批的key的数目
    # nacos.naming.distro.batchSyncKeyCount=1000
    
    ### Retry delay in milliseconds if sync task failed:
    # 同步任务失败的重试间隔，单位为毫秒
    # nacos.naming.distro.syncRetryDelay=5000
    
    ### If enable data warmup. If set to false, the server would accept request without local data preparation:
    # 是否在Server启动时进行数据预热
    # nacos.naming.data.warmup=true
    
    ### If enable the instance auto expiration, kind like of health check of instance:
    # 是否自动摘除临时实例
    # nacos.naming.expireInstance=true
    #是否自动清理不在线服务 
    nacos.naming.empty-service.auto-clean=true
    # 清理延迟时间
    nacos.naming.empty-service.clean.initial-delay-ms=50000
    # 清理间隔时间
    nacos.naming.empty-service.clean.period-time-ms=30000
    
    
    #*************** CMDB Module Related Configurations ***************#
    ### The interval to dump external CMDB in seconds:
    # 全量dump的间隔，单位为秒
    # nacos.cmdb.dumpTaskInterval=3600
    ### The interval of polling data change event in seconds:
    # 变更事件的拉取间隔，单位为秒
    # nacos.cmdb.eventTaskInterval=10
    
    ### The interval of loading labels in seconds:
    # 标签集合的拉取间隔，单位为秒
    # nacos.cmdb.labelTaskInterval=300
    
    ### If turn on data loading task:
    # 是否打开CMDB
    # nacos.cmdb.loadDataAtStart=false
    
    
    #*************** Metrics Related Configurations ***************#
    ### Metrics for prometheus
    # 监控端点
    #management.endpoints.web.exposure.include=*
    
    ### Metrics for elastic search
    # 是否导出监控数据到ES
    management.metrics.export.elastic.enabled=false
    # ES地址
    #management.metrics.export.elastic.host=http://localhost:9200
    
    ### Metrics for influx
    # 是否导出监控数据到influxdb（一款时序数据库）
    management.metrics.export.influx.enabled=false
    # 数据库名
    #management.metrics.export.influx.db=springboot
    # 数据库地址
    #management.metrics.export.influx.uri=http://localhost:8086
    # 是否自动创建数据库
    #management.metrics.export.influx.auto-create-db=true
    # 为每个点编写一致性
    #management.metrics.export.influx.consistency=one
    # 是否启用发布到Influx的指标批次的GZIP压缩
    #management.metrics.export.influx.compressed=true
    
    
    #*************** Access Log Related Configurations ***************#
    ### If turn on the access log:
    # 是否打印access日志
    server.tomcat.accesslog.enabled=true
    
    ### The access log pattern:
    # 日志打印格式
    server.tomcat.accesslog.pattern=%h %l %u %t "%r" %s %b %D %{
        User-Agent}i
    
    ### The directory of access log:
    # 日志存储目录
    server.tomcat.basedir=
    
    
    #*************** Access Control Related Configurations ***************#
    ### If enable spring security, this option is deprecated in 1.2.0:
    # 开启security框架访问控制
    #spring.security.enabled=false
    
    ### The ignore urls of auth, is deprecated in 1.2.0:
    # 配置security放行路径
    nacos.security.ignore.urls=/,/error,/**/*.css,/**/*.js,/**/*.html,/**/*.map,/**/*.svg,/**/*.png,/**/*.ico,/console-fe/public/**,/v1/auth/**,/v1/console/health/**,/actuator/**,/v1/console/server/**
    
    ### The auth system to use, currently only 'nacos' is supported：
    # 系统授权认证类型
    nacos.core.auth.system.type=nacos
    
    ### If turn on auth system:
    # 是否开启授权
    nacos.core.auth.enabled=false
    
    ### The token expiration in seconds:
    # 令牌失效时间
    nacos.core.auth.default.token.expire.seconds=18000
    
    ### The default token:
    # 默认访问密钥
    nacos.core.auth.default.token.secret.key=SecretKey012345678901234567890123456789012345678901234567890123456789
    
    ### Turn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.
    # 更新授权信息后的延迟时间
    nacos.core.auth.caching.enabled=true
    
    
    #*************** Istio Related Configurations ***************#
    ### If turn on the MCP server:
    # 是否开启MCP
    nacos.istio.mcp.server.enabled=false
    
    
    
    ###*************** Add from 1.3.0 ***************###
    
    
    #*************** Core Related Configurations ***************#
    
    ### set the WorkerID manually
    # 数据的主键雪花ID
    # nacos.core.snowflake.worker-id=
    
    ### Member-MetaData
    # nacos.core.member.meta.site=
    # nacos.core.member.meta.adweight=
    # nacos.core.member.meta.weight=
    
    ### MemberLookup
    ### Addressing pattern category, If set, the priority is highest
    # 寻址模式类型
    # nacos.core.member.lookup.type=[file,address-server,discovery]
    ## Set the cluster list with a configuration file or command-line argument
    # 使用配置文件或命令行参数设置群集列表
    # nacos.member.list=192.168.16.101:8847?raft_port=8807,192.168.16.101?raft_port=8808,192.168.16.101:8849?raft_port=8809
    ## for DiscoveryMemberLookup
    # If you want to use cluster node self-discovery, turn this parameter on
    # 自动寻址
    # nacos.member.discovery=false
    ## for AddressServerMemberLookup
    # Maximum number of retries to query the address server upon initialization
    # 初始化时查询地址服务器的最大重试次数
    # nacos.core.address-server.retry=5
    
    #*************** JRaft Related Configurations ***************#
    
    ### Sets the Raft cluster election timeout, default value is 5 second
    # 选举超时时间
    # nacos.core.protocol.raft.data.election_timeout_ms=5000
    ### Sets the amount of time the Raft snapshot will execute periodically, default is 30 minute
    # 集群以中性数据快照间隔时间
    # nacos.core.protocol.raft.data.snapshot_interval_secs=30
    ### Requested retries, default value is 1
    # 请求失败尝试次数
    # nacos.core.protocol.raft.data.request_failoverRetries=1
    ### raft internal worker threads
    # 线程个数
    # nacos.core.protocol.raft.data.core_thread_num=8
    ### Number of threads required for raft business request processing
    # 客户端线程请求数
    # nacos.core.protocol.raft.data.cli_service_thread_num=4
    ### raft linear read strategy, defaults to index
    # 一致性线性读策略
    # nacos.core.protocol.raft.data.read_index_type=ReadOnlySafe
    ### rpc request timeout, default 5 seconds
    # RPC 请求超时时间
    # nacos.core.protocol.raft.data.rpc_request_timeout_ms=5000