打流仪配置命令

待我称王封你为后i 2023-06-26 08:28 15阅读 0赞

以下输出的每一行配置即为添加该配置是对应的命令

如添加1/0/11口到iifgrp的命令为：iifgrp 34 add 1/0/11

其中34为id，做策略配置时用id指代对应口

当前配置

[Input Interface Group]
      iifgrp 1 add 1/0/13
      iifgrp 2 add 1/0/15
      iifgrp 3 add 1/0/17
      iifgrp 4 add 1/0/18
      iifgrp 5 add 1/0/19
      iifgrp 11 add 1/0/0
      iifgrp 12 add 1/0/1
      iifgrp 13 add 1/0/2
      iifgrp 14 add 1/0/3
      iifgrp 21 add 1/0/4
      iifgrp 22 add 1/0/5
      iifgrp 23 add 1/0/6
      iifgrp 24 add 1/0/7
      iifgrp 31 add 1/0/8
      iifgrp 32 add 1/0/9
      iifgrp 33 add 1/0/10
      iifgrp 34 add 1/0/11
                                                             
      [Output Interface Group]
      oifgrp 1 add 1/0/12 
      oifgrp 2 add 1/0/14 
      oifgrp 3 add 1/0/16 
      oifgrp 10 add 1/0/0 
      oifgrp 11 add 1/0/1 
      oifgrp 12 add 1/0/2 
      oifgrp 13 add 1/0/3 
      oifgrp 21 add 1/0/4 
      oifgrp 22 add 1/0/5 
      oifgrp 23 add 1/0/6 
      oifgrp 24 add 1/0/7 
      oifgrp 31 add 1/0/8 
      oifgrp 32 add 1/0/9 
      oifgrp 33 add 1/0/10 
      oifgrp 34 add 1/0/11 
      oifgrp 48 add 1/0/18 
      oifgrp 49 add 1/0/19 
      
      [Output Copy Group]
      copygrp 1 add 10-13
      copygrp 2 add 21-24
      copygrp 3 add 31-34
      
      [Rule]                                                 
      rule iifgrp add id=1 iifgrp=1 copy 1　　//把iifgrp=1的口的流量拷贝到oifgrp为10,11,12,13的口上
      rule iifgrp add id=2 iifgrp=11 forward 1　//把iifgrp=11的口的流量转到oifgrp=2的口上，这里iifgrp=11的口和copygrp中划出来的oifgrp=10的口是同一个口
      rule iifgrp add id=6 iifgrp=2 copy 2
      rule iifgrp add id=7 iifgrp=21 forward 2
      rule iifgrp add id=11 iifgrp=3 copy 3
      rule iifgrp add id=12 iifgrp=31 forward 3
      rule iifgrp add id=18 iifgrp=4 forward 49
      rule iifgrp add id=19 iifgrp=5 forward 48

常用命令

show running-config

rule iifgrp del id=3