CS5463代码模块解析（包含下载链接）

傷城~ 2023-01-16 03:22 201阅读 0赞

**CS5463单相双向功率IC**  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl8zNzc4NzA0Mw_size_16_color_FFFFFF_t_70]

char CS5463_Init_LZH(void)
    { 
    	//新增
    	CS = 1;
    	delay_us(100); //延时
    	CS = 0;
    
    	RST = 0;
    	// uDelay(100);
    	delay_us(100); //延时
    	RST = 1;
    	RST = 0;
    	delay_us(100);
    	RST = 1;
    	//----------------------
    	//发送同步序列
    	RX_Buff[0] = CMD_SYNC1;
    	RX_Buff[1] = CMD_SYNC1;
    	RX_Buff[2] = CMD_SYNC0;
    	SEGGER_RTT_printf(0, "串口初始化\n"); //调试通用
    	CS5463WriteReg(CMD_SYNC1, RX_Buff);	 //#define CMD_SYNC1 0XFF //开始串口重新初始化
    
    	RX_Buff[0] = 0x80;
    	RX_Buff[1] = 0x00;
    	RX_Buff[2] = 0x00;
    	CS5463WriteReg(REG_STATUSR, RX_Buff);	//初始化--状态寄存器 #define REG_STATUSR 0x5E //状态
    
    	//----------------------
    	//初始化--配置寄存器
    	//相位补偿为PC[6:0]=[0000000]；
    	//电流通道增益为Igain=10；
    	//EWA=0;
    	//INT中断为低电平有效IMODE:IINV=[00]
    	//iCPU=0
    	//K[3:0]=[0001]
    	//
    	//MCLK=4.096MHz如要求每秒钟计算10次，N=400，公式Times=(MCLK/K)/(1024*N)。//每秒钟计算1 次，N=4000
    	RX_Buff[0] = 0x00;
    	RX_Buff[1] = 0x00;
    	RX_Buff[2] = 0x01;//RX_Buff[2] = 0x01;
    	CS5463WriteReg(REG_CONFR, RX_Buff);	 // #define REG_CONFR 0x40 //配置
    
    	//试着修改N值
    
    	//现在使用N = 800
    // RX_Buff[0] = 0x00;
    // RX_Buff[1] = 0x03; //0x0F;
    // RX_Buff[2] = 0x20; //0xA0; //#define REG_CYCCONT 0x4A //一个计算周期的A/D转换数
    // CS5463WriteReg(REG_CYCCONT,RX_Buff); //初始化--CYCLE COUNT 寄存器,4000
    
    
    // RX_Buff[0] = 0x00;
    // RX_Buff[1] = 0x0F;
    // RX_Buff[2] = 0xA0; //#define REG_CYCCONT 0x4A //一个计算周期的A/D转换数
    // CS5463WriteReg(REG_CYCCONT,RX_Buff); //初始化--CYCLE COUNT 寄存器,4000
    
    	//10S
    // RX_Buff[0] = 0x00;
    // RX_Buff[1] = 0x01;
    // RX_Buff[2] = 0x90; //#define REG_CYCCONT 0x4A //一个计算周期的A/D转换数
    // CS5463WriteReg(REG_CYCCONT,RX_Buff); //初始化--CYCLE COUNT 寄存器,400
    
    
    	RX_Buff[0] = 0x00;
    	RX_Buff[1] = 0x9C;
    	RX_Buff[2] = 0x40;						//#define REG_CYCCONT 0x4A //一个计算周期的A/D转换数
    	CS5463WriteReg(REG_CYCCONT, RX_Buff);	//初始化--CYCLE COUNT 寄存器,40000
    
    
    	RX_Buff[0] = 0x00;
    	RX_Buff[1] = 0x00;
    	RX_Buff[2] = 0x00;
    	CS5463WriteReg(REG_MASKR, RX_Buff);		//初始化--中断屏蔽寄存器 #define REG_MASKR 0x74 //中断屏蔽
    
    	//----------------------
    	//初始化--操作寄存器
    	RX_Buff[0] = 0x00;
    	RX_Buff[1] = 0x00;
    	RX_Buff[2] = 0x01;
    	CS5463WriteReg(REG_MODER, RX_Buff);	 //#define REG_MODER 0x64 //操作模式
    	//----------------------
    //初始化--电流 交流偏置 校准寄存器
    // RW24XX(RX_Buff,3,EE_IACBIAS,0xA1);
    // CS5463WriteReg(REG_IACOFF,RX_Buff);
    //----------------------
    //初始化--电流 增益校准寄存器
    // RW24XX(RX_Buff,3,EE_IACGAIN,0xA1);
    // CS5463WriteReg(REG_IGN,RX_Buff);
    //----------------------
    //初始化--电压 交流偏置 校准寄存器
    // RW24XX(RX_Buff,3,EE_VACBIAS,0xA1);
    // CS5463WriteReg(REG_VACOFF,RX_Buff);
    //----------------------
    //初始化--电压 增益校准寄存器
    // RW24XX(RX_Buff,3,EE_VACGAIN,0xA1);
    // CS5463WriteReg(REG_VGN,RX_Buff);
    	//----------------------
    
    	//----------------------
    	//初始化--脉冲速率寄存器
    // RX_Buff[0] = 0x00;
    // RX_Buff[1] = 0x34;
    // RX_Buff[2] = 0x9C;
    // CS5463WriteReg(REG_PULRATE,RX_Buff);
    	//----------------------
    	//----------------------
    
    	//----------------------
    // RX_Buff[0] = 0x00;
    // RX_Buff[1] = 0x00;
    // RX_Buff[2] = 0x00;
    // CS5463WriteReg(REG_CTRLR,RX_Buff); //初始化--控制寄存器 #define REG_CTRLR 0x78 //控制
    	//----------------------
    	CS5463CMD(CMD_STARTC);				   	//启动连续转换 #define CMD_STARTC 0XE8 //执行连续计算周期
    //CS5463_Status = 0; //初始化任务进程状态
    //Load_Status = 0;
    //CS5463_CrmsSmallCunt = 0;
    //CS5463_CrmsOverCunt = 0;
    
    // SEGGER_RTT_printf(0,"CS5463_Init success! \r\n");
    
    	return(1);	  	  //只要做完这些步骤就返回true 1
    }

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl8zNzc4NzA0Mw_size_16_color_FFFFFF_t_70 1]  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl8zNzc4NzA0Mw_size_16_color_FFFFFF_t_70 2]  
代码和资料链接：https://download.csdn.net/download/weixin\_37787043/17198637

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl8zNzc4NzA0Mw_size_16_color_FFFFFF_t_70]: /images/20221022/875bafdd712542cea07fa6340a27137a.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl8zNzc4NzA0Mw_size_16_color_FFFFFF_t_70 1]: /images/20221022/ea2a672fa15b475dab09972d11a55cfa.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl8zNzc4NzA0Mw_size_16_color_FFFFFF_t_70 2]: /images/20221022/2a8cc42c3c2b4ea0bf3c2c811b3d7df9.png