android gps定位太慢,我的GPS定位很慢，你们帮我看下 gps.conf怎么优化

àì夳堔傛蜴生んèń 2022-10-14 01:11 49阅读 0赞

该楼层疑似违规已被系统折叠 隐藏此楼查看此楼

\#Test

NTP\_SERVER=time.gpsonextra.net

\#Asia

\# NTP\_SERVER=asia.pool.ntp.org

\#Europe

\# NTP\_SERVER=europe.pool.ntp.org

\#North America

\# NTP\_SERVER=north-america.pool.ntp.org

XTRA\_SERVER\_1=http://xtra1.gpsonextra.net/xtra2.bin

XTRA\_SERVER\_2=http://xtra2.gpsonextra.net/xtra2.bin

XTRA\_SERVER\_3=http://xtra3.gpsonextra.net/xtra2.bin

\# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info

\# 4 - Debug, 5 - Verbose

DEBUG\_LEVEL = 2

\# Intermediate position report, 1=enable, 0=disable

INTERMEDIATE\_POS=0

\# supl version 1.0

SUPL\_VER=0x10000

\# Error Estimate

\# \_SET = 1

\# \_CLEAR = 0

ERR\_ESTIMATE=0

\# GPS Capabilities bit mask

\# SCHEDULING = 1

\# MSB = 2

\# MSA = 4

\# ULP = 0x20

\# default = MSA | MSB | SCHEDULING | ULP

CAPABILITIES=0x27

\# Accuracy threshold for intermediate positions

\# less accurate positions are ignored, 0 for passing all positions

\# ACCURACY\_THRES=5000

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\#\#\#\#\# AGPS server settings \#\#\#\#\#

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# FOR SUPL SUPPORT, set the following

\# SUPL\_HOST=supl.host.com or IP

\# SUPL\_PORT=1234

\# FOR C2K PDE SUPPORT, set the following

\# C2K\_HOST=c2k.pde.com or IP

\# C2K\_PORT=1234

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# Sensor Settings

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# Needs to be set explicitly based on sensor

\# There is no default value.

\#GYRO\_BIAS\_RANDOM\_WALK=

\# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)

SENSOR\_ACCEL\_BATCHES\_PER\_SEC=2

SENSOR\_ACCEL\_SAMPLES\_PER\_BATCH=5

SENSOR\_GYRO\_BATCHES\_PER\_SEC=2

SENSOR\_GYRO\_SAMPLES\_PER\_BATCH=5

\# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)

SENSOR\_ACCEL\_BATCHES\_PER\_SEC\_HIGH=4

SENSOR\_ACCEL\_SAMPLES\_PER\_BATCH\_HIGH=25

SENSOR\_GYRO\_BATCHES\_PER\_SEC\_HIGH=4

SENSOR\_GYRO\_SAMPLES\_PER\_BATCH\_HIGH=25

\# Sensor Control Mode (0=AUTO, 1=FORCE\_ON)

SENSOR\_CONTROL\_MODE=0

\# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)

SENSOR\_USAGE=0

\# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)

SENSOR\_PROVIDER=1

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# Indoor Positioning Settings

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only

QUIPC\_ENABLED = 0

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# EXTRA SETTINGS

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# Enable or Disable Wiper (1=Enable, 0=Disable)

ENABLE\_WIPER=1

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# LTE Positioning Profile Settings

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\# 0: Enable RRLP on LTE(Default) 1: Enable LPP\_User\_Plane on LTE

LPP\_PROFILE = 0

android gps定位太慢,我的GPS定位很慢，你们帮我看下 gps.conf怎么优化

发表评论取消回复

还没有评论，来说两句吧...

相关阅读

相关 Android GPS定位学习笔记一

相关 android gps定位太慢,我的GPS定位很慢，你们帮我看下 gps.conf怎么优化

相关 android 定位demo,Android 自身GPS定位demo

相关 Android获取当前位置（GPS和网络定位）

相关 Android的基站、WIFI、GPS定位三点定位源码下载

相关 android模拟器模拟定位GPS

相关 GPS定位

相关 GPS定位基本原理

相关 GPS定位

相关 GPS、基站、Wi-Fi 定位