openwrt路由器安装Transmission软件包与web控制台(中文界面)

梦里梦外; 2022-10-05 11:49 1490阅读 0赞

# 简单 #

ssh登录openwrt路由器，执行以下命令。

opkg update
    opkg install transmission-daemon
    opkg install transmission-cli
    opkg install transmission-web
    opkg install transmission-remote
    opkg install luci-app-transmission

随系统启动`/etc/init.d/transmission enable` ,启动`/etc/init.d/transmission start`,  
停止`/etc/init.d/transmission stop`  
注意，配置文件在`cat /etc/config/transmission`，你需要修改`config_dir`目录，`download_dir`目录，`incomplete_dir`目录(在文件完成之前存储文件的位置)。  
有一个`option enabled 0`的选项，你要把它改为`option enabled 1`。

安装`transmission-web-control`  
获取脚本

wget https://gitee.com/culturist/transmission-web-control/raw/master/release/install-tr-control-gitee.sh

安装，执行安装脚本（如果系统不支持 bash 命令，请尝试将 bash 改为 sh ）：

bash install-tr-control-cn.sh

## Transmission下载出现错误的解决办法 Unable to save resume file: No such file or directory ##

出现这个问题的原因是配置的config文件夹权限不对,一定要指定所有者为 transmission 这个账号,如果不是的话,就算你设置成0777也未必有用。

设置的方法为 `chown transmission.transmission config_dir -R` ,其中的config\_dir为你自己的配置路径。

# 挂PT至少以下要修改: #

“dht-enabled”: false,

# UI #

![在这里插入图片描述][20210609092341881.png]打开`http://你的路由器IP地址:9091/transmission/`，后面的transmission一般不用加，加端口就可以自动跳转。在没有用迅雷和百度网盘的情况下，下载速度达到了600kB/s，挺不错的。

# 详细 #

There are several implementations of the [BitTorrent][] peer-to-peer file sharing protocol. Transmission is only one of them. After installation (`opkg install transmission-daemon`) there should be a config file in the uci directory.

A few more details about configuration file (/etc/config/transmission) can be found [here][].

You’ll probably need to set up USB support and format your drives for storage first, see the articles [here][here 1] and [here][here 2].

## Install ##

1.  the daemon: `transmission-daemon` is a daemon that runs in the background and is designed to not have any form of visual interface, consult [transmission][]
    
        opkg update
        opkg install transmission-daemon
2.  a control instance:

*  `transmission-cli`: to control the transmission daemon via \[CLI (Command-line interface)\](https://en.wikipedia.org/wiki/Command-line interface) on the server, consult [transmissioncli][]
    
        opkg install transmission-cli
 *  `transmission-web` to control the transmission daemon over \[HTTP (Hypertext Transfer Protocol)\](https://en.wikipedia.org/wiki/Hypertext Transfer Protocol) from a remote host machine with a web browser
    
        opkg install transmission-web
 *  `transmission-remote` to control the transmission daemon over the transmission JSON-\[RPC (Remote Procedure Call)\](https://en.wikipedia.org/wiki/Remote procedure call) from a remote host machine with a GUI program, e.g. [transmission-gtk][]/[transmission-qt][] or a [python-transmissionrpc][] or [transmisson-remote-gui][] for OS other then Debian ![;-)][-]
    
        opkg install transmission-remote

## Basic setup ##

To enable Transmission at all, put `option enable 1` into `/etc/config/transmission`.

If you want to start Transmission on boot, run

/etc/init.d/transmission enable

To start Transmission, run

/etc/init.d/transmission start

If you wish to use the web server, besides installing the package (see above), you might need to whitelist your IP address (if it is not in 192.168.1.0/24) via `option rpc_whitelist '127.0.0.1,192.168.1.*,your_ip_address`’ in the transmission configuration. By default, the server listens on port 9091. ie. 192.168.0.1:9091

To control transmission remotely via RPC, install [Transmission Remote GUI][transmisson-remote-gui] and set it up just like the webserver above. The RPC interface uses the same port as the web interface.

## Sections ##

There is only one section: `/etc/config/transmission`.

You’ll probably want to change the config\_dir, download\_dir, and incomplete\_dir variables to point to locations on external storage.  
您可能需要更改config\_dir、download\_dir和incomplete\_dir变量以指向外部存储上的位置

config transmission
            option enable 1
            option config_dir '/etc/transmission'
            option alt_speed_down 50
            option alt_speed_enabled false
            option alt_speed_time_begin  540
            option alt_speed_time_day 127
            option alt_speed_time_enabled false
            option alt_speed_time_end 1020
            option alt_speed_up 50
            option bind_address_ipv4 '0.0.0.0'
            option bind_address_ipv6 '::'
            option blocklist_enabled false
            option dht_enabled true
            option download_dir '/mnt/sda4/'
            option encryption 1
            option incomplete_dir '/mnt/sda4/incomplete'
            option incomplete_dir_enabled false
            option lazy_bitfield_enabled true
            option lpd_enabled false
            option message_level 2
            option open_file_limit 32
            option peer_limit_global 240
            option peer_limit_per_torrent 60
            option peer_port 51413
            option peer_port_random_high 65535
            option peer_port_random_low 49152
            option peer_port_random_on_start false
            option peer_socket_tos 0
            option pex_enabled true
            option port_forwarding_enabled false
            option preallocation 1
            option proxy ""
            option proxy_auth_enabled false
            option proxy_auth_password ''
            option proxy_auth_username ''
            option proxy_enabled false
            option proxy_port 80
            option proxy_type 0
            option ratio_limit 2.0000
            option ratio_limit_enabled false
            option rename_partial_files true
            option rpc_authentication_required false
            option rpc_bind_address '0.0.0.0'
            option rpc_enabled true
            option rpc_password ''
            option rpc_port 9091
            option rpc_username ''
            option rpc_whitelist '127.0.0.1,192.168.1.*'
            option rpc_whitelist_enabled true
            option script_torrent_done_enabled false
            option script_torrent_done_filename ''
            option speed_limit_down 100
            option speed_limit_down_enabled false
            option speed_limit_up 40
            option speed_limit_up_enabled true
            option start_added_torrents false
            option trash_original_torrent_files false
            option umask 18
            option upload_slots_per_torrent 14
            option watch_dir_enabled false
            option watch_dir ''

[Editing-Configuration-Files][]

<table> 
 <thead> 
  <tr> 
   <th align="left">Name</th> 
   <th align="left">Type</th> 
   <th align="left">Required</th> 
   <th align="left">Default</th> 
   <th align="left">Option</th> 
   <th align="left">Description</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td align="left"><code>config_dir</code></td> 
   <td align="left">path</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Where the configuration files are</td> 
  </tr> 
  <tr> 
   <td align="left"><code>bind_address_ipv4</code></td> 
   <td align="left">IP Address</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>bind_address_ipv6</code></td> 
   <td align="left">IPv6 Address</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>download_dir</code></td> 
   <td align="left">path</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Where to store you downloaded files</td> 
  </tr> 
  <tr> 
   <td align="left"><code>incomplete_dir_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether to store incomplete files somewhere else</td> 
  </tr> 
  <tr> 
   <td align="left"><code>incomplete_dir</code></td> 
   <td align="left">path</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Where to store files untill they are finished</td> 
  </tr> 
  <tr> 
   <td align="left"><code>dht_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether to enable dht (distributed hash tables)</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>blocklist_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether to make use of the blocklist defined in <em>config_dir</em></td> 
  </tr> 
  <tr> 
   <td align="left"><code>encryption</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether to use encrypted connections only (allow encryption: 0, prefer encryption: 1, require encryption: 2)</td> 
  </tr> 
  <tr> 
   <td align="left"><code>pex_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>speed_limit_down_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether transmission should limit its download speed</td> 
  </tr> 
  <tr> 
   <td align="left"><code>speed_limit_down</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">in KByte/s</td> 
  </tr> 
  <tr> 
   <td align="left"><code>speed_limit_up_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether transmission should limit its download speed</td> 
  </tr> 
  <tr> 
   <td align="left"><code>speed_limit_up</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">in KByte/s</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether transmission should use two speed limit settings</td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_down</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">in KByte/s</td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_up</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">in KByte/s</td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_time_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether to switch between the two speed-setting on a time table</td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_time_day</code></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">7-bit bitmask, 0000001=sunday, 1000000=saturday</td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_time_begin</code></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">default = 540, in minutes from midnight, 9am</td> 
  </tr> 
  <tr> 
   <td align="left"><code>alt_speed_time_end</code></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">default = 1020, in minutes from midnight, 5pm</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>upload_slots_per_torrent</code></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">how many peers can download a torrent at a time</td> 
  </tr> 
  <tr> 
   <td align="left"><code>open_file_limit</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">remember the low system memory</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_limit_global</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">the max number of peers globaly</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_limit_per_torrent</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">the max number of peers with connection per torrent</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_port</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">the fixed port transmission listens to incomming connections</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_port_random_high</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">highest port of the port range</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_port_random_low</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">lowest port of the port range</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_port_random_on_start</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether to use random ports instead of a fixed one from the beginning</td> 
  </tr> 
  <tr> 
   <td align="left"><code>peer_socket_tos</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether <code>type of service</code> is enabled</td> 
  </tr> 
  <tr> 
   <td align="left"><code>port_forwarding_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>preallocation</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether to fill the space for chunks not yet downloaded with “0” (helps avoiding fragmentation)</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>ratio_limit_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether to use a limit ratio</td> 
  </tr> 
  <tr> 
   <td align="left"><code>ratio_limit</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">automaticaly stop seeding a torrent when it reaches this ratio (with a GUI you can enable this for every torrent separately)</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>rename_partial_files</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether transmission-daemon should be remote controlled by a GUI on a host machine</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_bind_address</code></td> 
   <td align="left">IP Address</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">the address on which transmission-daemon listens to rpcs</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_port</code></td> 
   <td align="left">IP Port</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">the port on which transmission-daemon listens to rpcs</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_authentication_required</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether rpc needs authentication</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_username</code></td> 
   <td align="left">string</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">user name</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_password</code></td> 
   <td align="left">string</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">password</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_whitelist_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether to make use of the whitelist</td> 
  </tr> 
  <tr> 
   <td align="left"><code>rpc_whitelist</code></td> 
   <td align="left">IP Addresses</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">the IPs of the hosts allowed</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>watch_dir_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether to check a directory for new torrents put there. Leave this disabled It requres inotify enabled in kernel to works, which is not enabled by default in openwrt.</td> 
  </tr> 
  <tr> 
   <td align="left"><code>watch_dir</code></td> 
   <td align="left">path</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Path to the directory</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>script_torrent_done_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>script_torrent_done_filename</code></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>start_added_torrents</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>trash_original_torrent_files</code></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>umask</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Sets file mode creation mask. The mask should be in base 10 due to the json markup language used by Transmission. For instance, the standard umask octal notation <code>022</code> is written as <code>18</code>. If you want to save downloaded torrents to be world-writable (equivalent to <code>chmod 777</code> or <code>chmod a+rwx</code>) set this value to <code>0</code>.</td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>lazy_bitfield_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>lpd_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>message_level</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">whether to use a proxy</td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy</code></td> 
   <td align="left">IP address</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">IP adress of the proxy</td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy_port</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">IP port of the proxy</td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy_type</code></td> 
   <td align="left">integer</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Type of the proxy (http: 0, socks4: 1, socks5: 2)</td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy_auth_enabled</code></td> 
   <td align="left">boolean</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">Whether proxy needs authentication</td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy_auth_username</code></td> 
   <td align="left">string</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">username for the proxy</td> 
  </tr> 
  <tr> 
   <td align="left"><code>proxy_auth_password</code></td> 
   <td align="left">string</td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left"></td> 
   <td align="left">password for the proxy</td> 
  </tr> 
 </tbody> 
</table>

## Notes ##

*  Transmission performs much better when [swap][] is mounted.

## Example ##

A video demonstration of how Transmission 2.84 can be installed on OpenWrt 14.07 Barrier Breaker: https://www.youtube.com/watch?v=\_R1Kcpy4pj4 (video removed)

## Scripts ##

A script for adding alternative trackers to the select torrent searching it from its name or number. [Source][]

#!/bin/ash
    # Source: https://github.com/oilervoss/openwrt/tree/transmission
     
    TRANSMISSION_REMOTE='/usr/bin/transmission-remote'
     
    # Below is a command that will generate a tracker list with one tracker per line. Using live updated https://github.com/ngosang/trackerslist
    # You can use /some/path/trackers.txt for a static list
     
    LIVE_TRACKERS_LIST_CMD='curl -s --url https://raw.githubusercontent.com/ngosang/trackerslist/master/trackers_best_ip.txt' 
     
    TORRENTS=`$TRANSMISSION_REMOTE -l 2>/dev/null`
    PARAMETER=$1
     
    if [ $? -ne 0 ]; then
        echo -e "\n\e[0;91;1mFail on transmission. Aborting.\n\e[0m"
        exit 1
    fi
     
    if [ $# -eq 0 ]; then
        echo -e "\n\e[31mThis script expects one parameter\e[0m"
        echo -e "\e[0;36maddtracker \t\t- list current torrents "
        echo -e "addtracker \$number\t- add trackers to torrent of number \$number"
        echo -e "addtracker \$name\t- add trackers to first torrent with part of name \$name"	
        echo -e "\n\e[0;32;1mCurrent torrents:\e[0;32m"
        echo "$TORRENTS" | sed -n 's/$^.\{4\}$.\{64\}/\1/p'
        echo -e "\n\e[0m"
        exit 1
    fi
     
    # return number by searching 
    # transmission-remote -l | grep -i "Blueray" | sed -n 's/ *$[0-9]\+$.*/\1/p'
     
     
    if [ "${PARAMETER//[0-9]}" != "" ] ; then
    	PARAMETER=`echo "$TORRENTS" | grep -i "$PARAMETER" | sed -n 's/$[0-9]\+$.*/\1/p'`
     
    	if [ "${PARAMETER//[ ]}" != "" -a "${PARAMETER//[0-9 ]}" = "" ] ; then
    		echo -e "\n\e[0;32;1mI found the following torrent:\e[0;32m"
    		echo "$TORRENTS" | sed -n 's/$^.\{4\}$.\{64\}/\1/p' | grep -i "$1"
    	fi
     
    fi
     
    NUMBERCHECK=`echo "$TORRENTS" | sed -n '1d;s/$^.\{4\}$.*/\1/;/Sum/!p'|grep "$PARAMETER"`
     
    if [ "${PARAMETER//[0-9 ]}" != "" -o "${NUMBERCHECK//[ ]}" = "" ] ; then
    	echo -e "\n\e[0;31;1mI didn't find a torrent with text/number: \e[21m$1"
            echo -e "\n\e[0;32;1mCurrent torrents:\e[0;32m"
    	echo "$TORRENTS" | sed -n 's/$^.\{4\}$.\{64\}/\1/p' 
    	echo -e "\e[0m"
    	exit 1
    fi
     
    echo 
     
    $LIVE_TRACKERS_LIST_CMD | while read TRACKER
    do
    	if [ "$TRACKER" != "" ]; then
    		echo -ne "\e[0;36;1mAdding $TRACKER\e[0;36m"
    		$TRANSMISSION_REMOTE -t $PARAMETER-td $TRACKER 1>/dev/null 2>&1 
    		if [ $? -eq 0 ]; then
    			echo -e " -> \e[32mSuccess! "
    		else
    			echo -e " - \e[31m< Failed > "
    		fi
    	fi
    done
    echo -e "\e[0m"

[20210609092341881.png]: /images/20221005/5b6ad9081b4e4f7e9467e40370a0643b.png
[BitTorrent]: https://oldwiki.archive.openwrt.org/doc/howto/bittorrent
[here]: https://trac.transmissionbt.com/wiki/EditConfigFiles
[here 1]: https://oldwiki.archive.openwrt.org/doc/howto/usb.storage
[here 2]: https://oldwiki.archive.openwrt.org/doc/howto/storage
[transmission]: http://man.cx/transmission
[transmissioncli]: http://man.cx/transmissioncli
[transmission-gtk]: http://packages.debian.org/testing/transmission-gtk
[transmission-qt]: http://packages.debian.org/testing/transmission-qt
[python-transmissionrpc]: http://packages.debian.org/testing/python-transmissionrpc
[transmisson-remote-gui]: http://code.google.com/p/transmisson-remote-gui/
[-]: https://img-blog.csdnimg.cn/img_convert/112c13a85dbc43e496cd0d40a3cc86fc.gif
[Editing-Configuration-Files]: https://github.com/transmission/transmission/wiki/Editing-Configuration-Files
[swap]: https://oldwiki.archive.openwrt.org/doc/uci/fstab#addingswappartitions
[Source]: https://github.com/oilervoss/openwrt/tree/transmission