在MacOS上安装dnsmasq来配置域名模糊匹配

我就是我 2022-09-12 07:49 424阅读 0赞

# 在MacOS上安装dnsmasq来配置域名模糊匹配 #

## 前言 ##

如果是简单的域名匹配，在`/etc/hosts`中直接配置就可以了。

但是如果要配置域名模糊匹配，比如将`*.test` 都配置指向`127.0.0.1`，就需要用到dnsmasq。

## 配置将`*.test` 都配置指向`127.0.0.1` ##

# Install dnsmasq
    brew install dnsmasq
    
    # Setup dns configuration
    echo 'address=/.test/127.0.0.1' >> /usr/local/etc/dnsmasq.conf
    # Restart dnsmasq 
    sudo brew services restart dnsmasq
    
    # Add to resolvers
    sudo mkdir -p /etc/resolver
    sudo bash -c 'echo "nameserver 127.0.0.1" > /etc/resolver/test'
    
    # verify
    ping abc.test
    dig abc.test @127.0.0.1

## 配置将`*.example.com`都指向`182.61.200.7` ##

# Install dnsmasq
    brew install dnsmasq
    
    # Setup dns configuration
    # Replace as your domain and IP
    echo 'address=/.example.com/182.61.200.7' >> /usr/local/etc/dnsmasq.conf
    # Restart dnsmasq 
    sudo brew services restart dnsmasq
    
    # Add to resolvers
    sudo mkdir -p /etc/resolver
    # replace as your domain
    sudo bash -c 'echo "nameserver 127.0.0.1" > /etc/resolver/example.com'
    
    # verify
    ping abc.example.com
    dig abc.example.com @127.0.0.1

注意，有些网站会防止跨域访问，所以即使设置了域名映射，也可能会导致访问被拒绝。

## 参考文档 ##

*  [https://passingcuriosity.com/2013/dnsmasq-dev-osx/][https_passingcuriosity.com_2013_dnsmasq-dev-osx]
 *  [https://gist.github.com/ogrrd/5831371][https_gist.github.com_ogrrd_5831371]

[https_passingcuriosity.com_2013_dnsmasq-dev-osx]: https://passingcuriosity.com/2013/dnsmasq-dev-osx/
[https_gist.github.com_ogrrd_5831371]: https://gist.github.com/ogrrd/5831371