MSP432 BSL流程（UART）

墨蓝 2022-06-14 07:14 287阅读 0赞

## **升级流程** ##

PC程序会解析脚本中的命令，根据命令码做相应的操作。数据来自于命令后的文件（当前目录下的数据文件）

# cat script_P4xx_uart.txt
    
    LOG     //记录日志
    MODE P4xx UART 9600 COM25 PARITY    //初始化串口
    RX_PASSWORD_32 .\pass256_wrong.txt  //解锁BSL
    RX_PASSWORD_32 .\pass256_default.txt
    MASS_ERASE      //擦除整块flash
    RX_DATA_BLOCK_32 Blink_LED.txt  //写flash
    //RX_DATA_BLOCK_32 Blink_LED.hex
    TX_BSL_VERSION_32   //获取bsl version
    TX_DATA_BLOCK_32 0x0000 0x4000 ReadBlock_MSP432P401R.txt    //读flash
    //TX_DATA_BLOCK_32 0x0000 0x4000 ReadBlock_MSP432P401R.hex
    REBOOT_RESET    //复位

Created with Raphaël 2.1.2PCPCBSLBSL解锁BSLBSL检验。检验成功解锁BSL成功返回0x00；失败返回0x05擦除整块flash成功返回0x00；失败返回0x04写flash成功返回0x00；失败返回0x04获取bsl version成功返回version；失败返回0x04读flash成功返回flash数据；失败返回0x04flash数据记录到文件复位

## **数据结构** ##

![数据结构][SouthEast]

## **PC侧** ##

**COMMANDS**  
需要处理的命令列表，所有的操作都是以命令形式触发

#define COMMANDS(DO) \
        DO(LOG) \
        DO(MODE) \
        DO(RX_DATA_BLOCK) \
        DO(RX_PASSWORD) \
        DO(ERASE_SEGMENT) \
        DO(TOGGLE_INFO) \
        DO(ERASE_BLOCK) \
        DO(MASS_ERASE) \
        DO(CRC_CHECK) \
        DO(SET_PC) \
        DO(TX_DATA_BLOCK) \
        DO(TX_BSL_VERSION) \
        DO(TX_BUFFER_SIZE) \
        DO(RX_DATA_BLOCK_FAST) \
        DO(RX_DATA_BLOCK_32) \
        DO(RX_PASSWORD_32) \
        DO(ERASE_SEGMENT_32) \
        DO(REBOOT_RESET) \
        DO(CRC_CHECK_32) \
        DO(SET_PC_32) \
        DO(TX_DATA_BLOCK_32) \
        DO(TX_BSL_VERSION_32) \
        DO(RX_SECURE_DATA_BLOCK) \
        DO(CHANGE_BAUD_RATE) \
        DO(FACTORY_RESET) \
        DO(JTAG_LOCK) \
        DO(JTAG_PASSWORD) \
        DO(VERBOSE) \
        DO(DELAY) \
        DO(CUSTOM_COMMAND)

**主要函数**  
命令处理中，主要命令处理函数是：接收命令处理函数和发送命令处理函数

void Interpreter::executeCommand(CommandParams cmd);    //命令处理
    void Interpreter::executeRxCommand();       //接收命令
    void Interpreter::executeTxCommand();       //发送命令
    
    void UartComm::transmitBuffer(std::vector<uint8_t>* txBuffer);  //发送数据
    std::vector<uint8_t>* UartComm::receiveBuffer(int32_t size);    //接收数据

**init**  
初始化的时候，PC发送一个字节“0xFF”，MSP432去计算波特率，然后回应PC一个字节“0x00”，初始化成功。连续发送10次，直到初始化成功，否则初始化失败

void UartComm::init(ModeParams* modeParams);
    void UartComm::transmitP4xxInitialization();
    const uint8_t loopInitialization = 10;

**transmitBuffer**  
每当发送数据完成，PC端都会验证MSP432回应的ACK是否正确，如果不正确，很可能MSP432没有接收到数据

Header = 0x80
    txBuffer->size() & 0xFF
    (txBuffer->size() >> 8) & 0xFF
    txBuffer        //数据
    getCheckSumLow()
    getCheckSumHigh()

**receiveBuffer**  
接收数据格式和发送数据格式一致。接收延时1000ms，接收端会首先接收并检查ack是否正确，接收buf是256个字节

uint32_t msDelay = 1000;
    this->setTimer(msDelay);
    this->startReadAck(&ack, expSize);
    
    Header = 0x80
    rxUartBuffer = 256

## **MSP432侧** ##

**中断注册**

#define BSL432_MAX_BUFFER_SIZE 262 //buf大小262个字节
    volatile uint8_t BSL432_RAM_TX_Buf[BSL432_MAX_BUFFER_SIZE + 6]; //6：Header + Buffersize + CheckSum

MAP_GPIO_registerInterrupt(BSL432_UART_PORT, BSL432_PI_UARTdetect);
    BSL432_PI_initUART(BSL432_UARTBaudRates9600);
    BSL432_PI_sendByteUART(BSL432_ACK);

BSL432\_PI\_UARTdetect：中断处理函数。响应PC端初始化流程，计算波特率并初始化UART，最后回应PC ACK

MAP_UART_registerInterrupt(BSL432_UART_MODULE, BSL432_PI_IRQ_UART);
    void BSL432_PI_IRQ_UART(void);
    uint8_t receivedData = MAP_UART_receiveData(BSL432_UART_MODULE);
    BSL432_ReceiveBuffer[BSL432_PI_IRQ_RxDataCnt++] = receivedData;

BSL432\_PI\_IRQ\_UART：接收中断处理函数。当有中断触发，MSP432开始接收数据，把数据保存到BSL432\_ReceiveBuffer中，直到接收完成

**数据解析**

BSL432_eventFlags BSL432_PI_receivePacketUART();

数据解析由BSL432\_PI\_receivePacketUART函数完成。主要功能是校验头，记录数据大小，校验checksum  
BSL循环去接收串口数据，直到收完指定Buffersize大小，做一次处理

**数据处理**

void BSL432_CI_interpretCommand();

当一个正确的包接收并解析完成，由BSL432\_CI\_interpretCommand做数据处理并回应PC ACK

**BSL432 Commands**  
BSL侧命令列表，和PC侧是一一对应的

#define BSL432_RX_DATA_BLOCK 0x10
    #define BSL432_RX_DATA_BLOCK_32 0x20
    #define BSL432_RX_PASSWORD 0x21
    #define BSL432_ERASE_SECTOR 0x12
    #define BSL432_ERASE_SECTOR_32 0x22
    #define BSL432_RX_MASS_ERASE 0x15
    #define BSL432_REBOOT_RESET 0x25
    #define BSL432_RX_CRC_CHECK 0x16
    #define BSL432_RX_CRC_CHECK_32 0x26
    #define BSL432_RX_LOAD_PC 0x17
    #define BSL432_RX_LOAD_PC_32 0x27
    #define BSL432_TX_DATA_BLOCK 0x18
    #define BSL432_TX_DATA_BLOCK_32 0x28
    #define BSL432_TX_BSL_VERSION 0x19
    #define BSL432_FACTORY_RESET 0x30
    #define BSL432_CHANGE_BAUD_RATE 0x52

**BSL432\_RX\_DATA\_BLOCK**

void BSL432_CI_receiveDataBlock(uint32_t addr, uint8_t *data)
    {
        uint8_t returnValue = BSL432_API_openMemory(); //flash写使能
    
        // Check if there is data in buffer (cmd + addr take 4 bytes, 24 bit addr)
        if((returnValue == BSL432_SUCCESSFUL_OPERATION) & (BSL432_ReceiveBufferSize > 4))
        {
            returnValue = BSL432_API_writeMemory(addr, BSL432_ReceiveBufferSize - 4, data); //写flash
        }
    
        BSL432_CI_sendMessage(returnValue); //回应PC
        BSL432_API_closeMemory(); //flash写锁定
    }

**BSL432\_CI\_receivePassword**  
解锁BSL。对flash操作首先需要flash为非锁定状态，否则操作失败

void BSL432_CI_receivePassword()
    {
        if (BSL432_API_unlockBSL(&BSL432_ReceiveBuffer[4]) == BSL432_SUCCESSFUL_OPERATION)
        {
            BSL432_CI_sendMessage(BSL432_ACK); //回应PC
        }
        else
        {
            BSL432_CI_sendMessage(BSL432_PASSWORD_ERROR);
        }
    }

**BSL432\_ERASE\_SECTOR**

uint8_t BSL432_API_eraseSector(uint32_t addr)
    {
        uint8_t exceptions = BSL432_LOCKED;
        if(BSL432_LockedStatus == BSL432_STATUS_UNLOCKED)
        {
            exceptions = BSL432_SUCCESSFUL_OPERATION;
            exceptions = BSL432_API_openMemory();
    #ifdef __MSP432P401R__
            MAP_FlashCtl_eraseSector(addr); //擦除指定扇区
    #elif defined __MSP432P4111__
            MAP_FlashCtl_A_eraseSector(addr);
    #else
    #error Device not defined.
    #endif
            exceptions = BSL432_API_closeMemory();
        }
        else
        {
            exceptions = BSL432_LOCKED;
        }
        return exceptions;
    }

**BSL432\_RX\_MASS\_ERASE**

uint8_t BSL432_API_massErase(uint32_t locked); //擦除整块扇区

**BSL432\_RX\_CRC\_CHECK**

void BSL432_CI_CRCCheck(uint32_t addr, uint32_t length); //CRC校验

**BSL432\_RX\_LOAD\_PC**

uint8_t BSL432_API_callAddress(uint32_t addr); //加载指定地址程序

**BSL432\_TX\_DATA\_BLOCK**

void BSL432_CI_sendDataBlock(uint32_t addr, uint32_t length); //获取指定地址数据，发送给PC

**BSL432\_TX\_BSL\_VERSION**

BSL432_CI_sendDataBlock((uint32_t)(&BSL432_VersionVendor), 10); //获取版本，发送给PC

**BSL432\_REBOOT\_RESET**

void BSL432_API_rebootReset(); //重启