linux与windows通信

客官°小女子只卖身不卖艺 2022-06-11 08:29 228阅读 0赞

我用的linux系统是ubuntu14.04,windows系统是windows 10,两个电脑之间通过网线连接.  
连接的时候最好关闭系统的防火墙,否则会出现问题,两个系统都要关闭防火墙.  
ubuntu关闭防火墙的方法是,在命令行输入 : `sudo ufw disable` 接着输入密码就可以.  
windows关闭防火墙的方法是,在**控制面板**找到**系统和安全**,然后再找到**windows防火墙**,在左侧找到**启用或关闭windows防火墙** ,全部关闭即可.  
运行的时候,在ubuntu系统上,先编译`gcc server.c -o server` ,然后运行`./server` ,然后在windows系统运行代码,windows端我用的是vs2017,接下来windows这边输入什么,ubuntu那边就会输出什么.  
注意:一定要先运行ubuntu的代码,然后再运行winodws的代码.  
linux端的代码:

#include <netinet/in.h>
    #include <sys/types.h>
    #include <sys/socket.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>
    #define HELLO_WORLD_SERVER_PORT    4000
    #define LENGTH_OF_LISTEN_QUEUE 20
    #define BUFFER_SIZE 1024
    
    int main(int argc, char **argv)
    {
        struct sockaddr_in server_addr;
            int server_socket;
            int opt = 1;
    
        bzero(&server_addr,sizeof(server_addr));
    
        server_addr.sin_family = AF_INET;
        server_addr.sin_addr.s_addr = htons(INADDR_ANY);
        server_addr.sin_port = htons(HELLO_WORLD_SERVER_PORT);
    
            /* create a socket */
        server_socket = socket(PF_INET,SOCK_STREAM,0);
        if( server_socket < 0)
        {
            printf("Create  Failed!");
            exit(1);
        }
    
        /* bind socket to a specified address*/
        setsockopt(server_socket, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt));
        if( bind(server_socket,(struct sockaddr*)&server_addr,sizeof(server_addr)))
        {
            printf("Server Bind Port : %d Failed!", HELLO_WORLD_SERVER_PORT);
            exit(1);
        }
    
        /* listen a socket */
        if(listen(server_socket, LENGTH_OF_LISTEN_QUEUE))
        {
            printf("Server Listen Failed!");
            exit(1);
        }
    
            /* run server */
        while (1)
        {
            struct sockaddr_in client_addr;
                    int client_socket;
            socklen_t length;
                    char buffer[BUFFER_SIZE];
    
                    /* accept socket from client */
                    length = sizeof(client_addr);
            client_socket = accept(server_socket, (struct sockaddr*)&client_addr, &length);
            if( client_socket < 0)
            {
                printf("Server Accept Failed!\n");
                break;
            }
    
                    /* receive data from client */
                    while(1)
                    {
                            bzero(buffer, BUFFER_SIZE);
                            length = recv(client_socket, buffer, BUFFER_SIZE, 0);
                            if (length < 0)
                            {
                                    printf("Server Recieve Data Failed!\n");
                                    break;
                            }
    
                            if('q' == buffer[0])
                            {
                                    printf("Quit from client!\n");
                                    break;
                            }
    
                            printf("%s\n", buffer);
                    }
    
            close(client_socket);
        }
    
        close(server_socket);
        return 0;
    }

windows端的代码:

#include <iostream>
    #include <Windows.h>  
    
    using namespace std;
    #pragma comment(lib,"ws2_32.lib")  
    #define  PORT 4000  
    #define  IP_ADDRESS "166.111.138.13"  
    
    int main(int argc, char* argv[])
    {
        WSADATA  Ws;
        SOCKET ClientSocket;
        struct sockaddr_in ClientAddr;
        int Ret = 0;
        //char SendBuffer[MAX_PATH];
        char SendBuffer[MAX_PATH] = "abcd";
        char c[1];
        /* Init Windows Socket */
        if (WSAStartup(MAKEWORD(2, 2), &Ws) != 0)
        {
            printf("Init Windows Socket Failed::%d\n", GetLastError());
            return -1;
        }
    
        /* Create Socket */
        ClientSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
        if (ClientSocket == INVALID_SOCKET)
        {
            printf("Create Socket Failed::%d\n", GetLastError());
            return -1;
        }
    
        ClientAddr.sin_family = AF_INET;
        ClientAddr.sin_addr.s_addr = inet_addr(IP_ADDRESS);
        ClientAddr.sin_port = htons(PORT);
        memset(ClientAddr.sin_zero, 0x00, 8);
    
        /* connect socket */
        Ret = connect(ClientSocket, (struct sockaddr*)&ClientAddr, sizeof(ClientAddr));
        if (Ret == SOCKET_ERROR)
        {
            printf("Connect Error::%d\n", GetLastError());
            return -1;
        }
        else
        {
            printf("Connect succedded!\n");
        }
    
        while (1)
        {
            cin >> SendBuffer ;
            /* send data to server */
            Ret = send(ClientSocket, SendBuffer, (int)strlen(SendBuffer), 0);
            if (Ret == SOCKET_ERROR)
            {
                printf("Send Info Error::%d\n", GetLastError());
                break;
            }
    
            if ('q' == SendBuffer[0])
            {
                break;
            }
        }
    
        /* close socket */
        closesocket(ClientSocket);
        WSACleanup();
        return 0;
    }

附:ROS下使用的代码,将接收到的数据,以topic的形式发出去,注意运行的时候,要先运行roscore,再运行代码,我创建了一个ros包,创建过程看ros官网教程就好.

#include "ros/ros.h"
    #include "std_msgs/String.h"
    
    #include <iostream>
    #include <netinet/in.h>
    #include <sys/types.h>
    #include <sys/socket.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>
    #define HELLO_WORLD_SERVER_PORT    4000
    #define LENGTH_OF_LISTEN_QUEUE 20
    #define BUFFER_SIZE 1024
    
    using namespace std;
    
    int main(int argc, char **argv)
    {
        ros::init(argc,argv,"server");
        ros::NodeHandle n;
        ros::Publisher chatter_pub = n.advertise<std_msgs::String>("server",1000);
        //ros::Rate loop_rate(20);
    
        struct sockaddr_in server_addr;
            int server_socket;
            int opt = 1;
    
        bzero(&server_addr,sizeof(server_addr));
    
        server_addr.sin_family = AF_INET;
        server_addr.sin_addr.s_addr = htons(INADDR_ANY);
        server_addr.sin_port = htons(HELLO_WORLD_SERVER_PORT);
    
            /* create a socket */
        server_socket = socket(PF_INET,SOCK_STREAM,0);
        if( server_socket < 0)
        {
            printf("Create  Failed!");
            exit(1);
        }
    
        /* bind socket to a specified address*/
        setsockopt(server_socket, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt));
        if( bind(server_socket,(struct sockaddr*)&server_addr,sizeof(server_addr)))
        {
            printf("Server Bind Port : %d Failed!", HELLO_WORLD_SERVER_PORT);
            exit(1);
        }
    
        /* listen a socket */
        if(listen(server_socket, LENGTH_OF_LISTEN_QUEUE))
        {
            printf("Server Listen Failed!");
            exit(1);
        }
    
        /* run server */
        //while (ros::ok())
        //{
        
        struct sockaddr_in client_addr;
        int client_socket;
        socklen_t length;
        char buffer[BUFFER_SIZE];
    
        /* accept socket from client */
        length = sizeof(client_addr);
        client_socket = accept(server_socket, (struct sockaddr*)&client_addr, &length);
        if( client_socket < 0)
        {
            printf("Server Accept Failed!\n");
            //break;
        }
        /* receive data from client */
        while(ros::ok())
        {       
            std_msgs::String msg;
            bzero(buffer, BUFFER_SIZE);
            length = recv(client_socket, buffer, BUFFER_SIZE, 0);
            if (length < 0)
            {
                printf("Server Recieve Data Failed!\n");
                break;
            }
            if('q' == buffer[0])
            {
                printf("Quit from client!\n");
                break;
            }
            msg.data = buffer;
            printf("%s\n", buffer);
            chatter_pub.publish(msg);
        }
            //loop_rate.sleep();
            close(client_socket);
        //}
        close(server_socket);
        return 0;
    }

声明:我的代码是拷贝的别人的,不是我自己写的,我只是稍加修改,如果有不满意,请联系我.